Mitutoyo Radius Gage Set, Range: 7.5mm to 15mm by 0.5mm, Number of Leaves: 32 Pairs of Leaves
Linear Measurement
KEY SEAT CLAMPS, PAIR Review
These key seat clamps convert steel rules, combination square blades and straight edges into key seat rules for laying out keyways and scribing parallel lines on round work. They can be easily attached or removed. Made of steel, case hardened, and accurately ground, they are 1″ long x 7/16″ wide (25 x 11mm) and have a 7/64″ (2.8mm) slot width. Available in pairs only.
Mitutoyo 178-602, Surface Roughness Specimen, Inch and Metric Review
Mitutoyo Surface Roughness Specimen, Inch/Metric
General Tools LDM1 Compact Laser Measure Review
- Make sure this fits by entering your model number.
- MEASURE FURTHER – the LDM1 Laser Measure can measure up to 50ft with the push of a button
- MEASURE FASTER – get the measurements of a room in seconds with the LDM1 Laser Measure
- ONE BUTTON OPERATION – with the click of a button, your measurement is taken. Simple and easy to use
- COMPACT SIZE – the Laser Measure is portable and compact. Fits right in your pocket!
- CLASS II LASER PRODUCT <1mW power output
This fits your .
General Tools LDM1 Laser Distance Measurer
The General Tools LDM1 Laser Distance Measurer is designed to replace a conventional tape measure in the hands of both DIYers and professionals. The LDM1 is faster, safer and more accurate than a conventional tape measure. It takes much less time and only one hand to hold the tool against a wall, aim at the opposite wall and press the button than it does requiring both hands to secure one end of a conventional tape measure, walk the other end to the far wall, write down the reading and retract the tape. The LDM1’s digital display, which can be held at eye level, is much easier to read than the tiny has marks on a conventional tape measure.
Additionally, because the LDM1 laser distance measurer can measure distances from a distance, it takes the risk out of routine but tricky tasks. For example, it makes it unnecessary to stand on a stepladder and reach to measure the height of a ceiling. The LDM1’s range of 50 ft. makes it perfect for most indoor measuring tasks and many outdoor jobs as well!
GENERAL TOOLS – THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT.
Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.
WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS.
For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.
Techon Systems 1212-004-002PK 1212 Polyethylene Dispensing Tube, 0.1″I/D, Male/Female, Natural (Pack of 10) Review
1212-004-002PK 1212 Polyethylene Dispensing Tube, 0.1″I/D, Male/Female, Natural (Pack of 10).
Metal Adhesive Backed Ruler – 3/8 Inch Wide X 25 Feet Long – Right to Left – Fractional – 1/16” Grads Review
- Make sure this fits by entering your model number.
- 3/8” wide and 25 FT (300”) long, with 1/16” graduations
- Reads right to left. Adhesive Backed Ruler, peel and stick
- Made of flat .006 thick tempered steel with original graphics
- Reads in continuous inches
- Continuous length, not in sections
This fits your .
These metal adhesive backed rules were designed with original graphics from Oregon Rule Co. Each ruler comes individually packed. Excellent quality and easily read, stick these rulers nearly anywhere for convenient, quick measurements: work benches, lathe beds, drill presses, fishing boats, table saws, sewing tables, radial arm saws, butcher blocks, drafting tables, and more. Our metal adhesive backed rulers lie flat and can be cut to size using scissors; they are made from .006” thick tempered steel.
3/8” wide and 25 FT (300”) long
Fractional, 1/16” graduations
Reads from right to left, continuous inches
Bold black graphics on a yellow background
Similar Products (search by ASIN):
ASIN: B00GSU6G3Q – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 25 Feet Long – Left to Right – Fractional – 1/16” Grads
ASIN: B00I85KSBU – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 12 Feet Long – Left to Right – Fractional – 1/16” Grads
ASIN: B00GSUFWFY – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 50 Feet Long – Left to Right – Fractional – 1/16” Grads
ASIN: B00I86RBVY – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 50 Feet Long – Right to Left – Fractional – 1/16” Grads
ASIN: B00I8PY6IQ – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 25 Feet Long – Left to Right – Fractional – 1/8” Grads
ASIN: B00H7H2M7I – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 25 Feet Long – Right to Left – Fractional – 1/8” Grads
ASIN: B00I8Q6O08 – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 50 Feet Long – Left to Right – Fractional – 1/8” Grads
ASIN: B00H7HDC7W – Metal Adhesive Backed Ruler – 3/8 Inch Wide X 50 Feet Long – Right to Left – Fractional – 1/8” Grads
UEi Test Instruments DL429 G3 Phoenix Clamp Meter Review
- Make sure this fits by entering your model number.
- Also available through app
- Wireless detector
- built-in worklight
This fits your .
Style:DL429
UEi DL429 Advanced TRMS HVAC Clamp Meter with Wireless connection is a new advanced True RMS HVAC clamp meter that AC/DC Voltage and AC Amperage, along with many other parameters, that can wirelessly transmit data to a smartphone or tablet device. The UEi DL429 features a dual display design, built-in worklight, a magnetic mount and is rugged enough to withstand a 6 foot drop.
Doyle Tree & Log Scale Stick Review
- Make sure this fits by entering your model number.
- SCALE STICK DOYLE
This fits your .
Doyle Tree & Log Scale Stick
Calculated Construction Calculator Review
- Make sure this fits by entering your model number.
- The construction master pro (model 4065) from Calculated Industries sets the industry standard for advanced construction-math calculators
- This product is easy to use easy to install and highly durable
- It’s ideal for or contractors, estimators, architects, builders, framers, engineers, concrete/foundation contractors, draftspersons, and more
- Construction math calculator designed for construction professionals
- Performs common building formulas; area and volume calculations; works in various units, English/metric
This fits your .
Product description
Construction math calculator designed for construction professionals Performs common building formulas; area and volume calculations; works in various units, English/metric Plastic back, aluminum front, soft rubbed buttons Includes 2 3-volt lithium batteries, user guide, quick reference guide, protective slide cover
From the Manufacturer
The Construction Master Pro is loaded with the advanced calculating features required by Construction Pros. Quickly solve for Stairs, Rafters, Hips, Valleys and Rake Walls. Get instant cutting angles – cheek, level and plumb and stud length for any on-center spacing. Calculate and convert simply and accurately in Yards, Feet-Inch-Fraction and Metric dimensions- including square and cubic. Circular function finds arches, columns, windows, pillars and post-hole dimensions. Automatic block and footing keys, backspace key, plus three built-in memories and preference function for user-defined options. Includes Weight-per-Volume and D:M:S to Decimal Degree conversion capability. It is the most complete construction calculator developed and designed specifically to increase efficiency, save money and ensure more job-winning bids and estimates. The Construction Master® Pro comes with a One-Year Warranty, Protective Hard-case, Easy-to-follow Full Size User’s Manual and Field Reference Guide. Construction Master was recognized with the 2002 #1 Quality Rating for ‘Builders Instruments’ by Builder’s Magazine.
G.A.L. Gage Co. – Pocket Bridgecam GAL-4a Review
- Make sure this fits by entering your model number.
- Angle of Preparation, 0 to 60
- Excess Weld Metal (capping size)
- Depth of Undercut By 1/32
- Depth of Pitting By 1/32
- Fillet Weld Throat Size (1/64 or .5 mm, Theoretical & Actual)
This fits your .
Angle of Preparation, 0o to 60o Excess Weld Metal (capping size) Depth of Undercut By 1/32” Depth of Pitting By 1/32” Fillet Weld Throat Size (1/64” or .5 mm, Theoretical & Actual) Fillet Weld Leg Length Misalignment (High-Low)